Free electron nonlinearities in heavily doped semiconductors plasmonics

Heavily doped semiconductors have emerged as tunable low-loss plasmonic materials at mid-infrared frequencies. In this article we investigate nonlinear optical phenomena associated with high concentration of free electrons. We use a hydrodynamic description to study free electron dynamics in heavily doped semiconductors up to third-order terms, which are usually negligible for noble metals. We find that cascaded third-harmonic generation due to second-harmonic signals can be as strong as direct third-harmonic generation contributions even when the second-harmonic generation efficiency is zero. Moreover, we show that when coupled with plasmonic enhancement free electron nonlinearities could be up to two orders of magnitude larger than conventional semiconductor nonlinearities. Our study might open a new route for nonlinear optical integrated devices at mid-infrared frequencies

Thermoplasmonic effect of surface enhanced infrared absorption in vertical nanoantenna arrays

Thermoplasmonics is a method for increasing temperature remotely using focused visible or infrared laser beams interacting with plasmonic nanoparticles. Here, local heating induced by mid-infrared quantum cascade laser illumination of vertical gold-coated nanoantenna arrays embedded into polymer layers is investigated by infrared nanospectroscopy and electromagnetic/thermal simulations. Nanoscale thermal hotspot images are obtained by a photothermal scanning probe microscopy technique with laser illumination wavelength tuned at the different plasmonic resonances of the arrays. Spectral analysis indicates that both Joule heating by the metal antennas and surface-enhanced infrared absorption (SEIRA) by the polymer molecules located in the apical hotspots of the antennas are responsible for thermoplasmonic resonances, i.e. for strong local temperature increase. At odds with more conventional planar nanoantennas, the vertical antenna structure enables thermal decoupling of the hotspot at the antenna apex from the heat sink constituted by the solid substrate. The temperature increase was evaluated by quantitative comparison of data obtained with the photothermal expansion technique to the results of electromagnetic/ thermal simulations. In the case of strong SEIRA by the C=O bond of poly-methylmethacrylate at 1730 cm-1, for focused mid-infrared laser power of about 20 mW, the evaluated order of magnitude of the nanoscale temperature increase is of 10 K. This result indicates that temperature increases of the order of hundreds of K may be attainable with full mid-infrared laser power tuned at specific molecule vibrational fingerprints

Protein clustering in chemically stressed HeLa cells studied by infrared nanospectroscopy

Photo-Thermal Induced Resonance (PTIR) nanospectroscopy, tuned towards amide-I absorption, was used to study the distribution of proteic material in 34 different HeLa cells, of which 18 were chemically stressed by oxidative stress with Na3AsO3. The cell nucleus was found to provide a weaker amide-I signal than the surrounding cytoplasm, while the strongest PTIR signal comes from the perinuclear region. AFM topography shows that the cells exposed to oxidative stress undergo a volume reduction with respect to the control cells, through an accumulation of the proteic material around and above the nucleus. This is confirmed by the PTIR maps of the cytoplasm, where the pixels providing a high amide-I signal were identified with a space resolution of ∼300 × 300 nm. By analyzing their distribution with two different statistical procedures we found that the probability to find protein clusters smaller than 0.6 μm in the cytoplasm of stressed HeLa cells is higher by 35% than in the control cells. These results indicate that it is possible to study proteic clustering within single cells by label-free optical nanospectroscopy

Thermoplasmonic effect of surface enhanced infrared absorption in vertical nanoantenna arrays

Thermoplasmonics is a method for increasing temperature remotely using focused visible or infrared laser beams interacting with plasmonic nanoparticles. Here, local heating induced by mid-infrared quantum cascade laser illumination of vertical gold-coated nanoantenna arrays embedded into polymer layers is investigated by infrared nanospectroscopy and electromagnetic/thermal simulations. Nanoscale thermal hotspot images are obtained by a photothermal scanning probe microscopy technique with laser illumination wavelength tuned at the different plasmonic resonances of the arrays. Spectral analysis indicates that both Joule heating by the metal antennas and surface-enhanced infrared absorption (SEIRA) by the polymer molecules located in the apical hotspots of the antennas are responsible for thermoplasmonic resonances, i.e. for strong local temperature increase. At odds with more conventional planar nanoantennas, the vertical antenna structure enables thermal decoupling of the hotspot at the antenna apex from the heat sink constituted by the solid substrate. The temperature increase was evaluated by quantitative comparison of data obtained with the photothermal expansion technique to the results of electromagnetic/ thermal simulations. In the case of strong SEIRA by the C=O bond of poly-methylmethacrylate at 1730 cm-1, for focused mid-infrared laser power of about 20 mW, the evaluated order of magnitude of the nanoscale temperature increase is of 10 K. This result indicates that temperature increases of the order of hundreds of K may be attainable with full mid-infrared laser power tuned at specific molecule vibrational fingerprints

Boosting infrared energy transfer in 3D nanoporous gold antennas

The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as a plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibrational frequency. The effective optical response of the nanoporous metal enables the penetration of optical fields deep into the nanopores, where molecules can be loaded thus achieving a more efficient light–matter coupling if compared to bulk gold. In order to realize plasmonic resonators made of nanoporous gold, we develop a nanofabrication method based on polymeric templates for metal deposition and we obtain antenna arrays resonating at mid-infrared wavelengths selected by design. We then coat the antennas with a thin (3 nm) silica layer acting as the target dielectric layer for optical energy transfer. We study the strength of the light–matter coupling at the vibrational absorption frequency of silica at 1240 cm−1 through the analysis of the experimental Fano lineshape that is benchmarked against identical structures made of bulk gold. The boost in the optical energy transfer from free-space mid-infrared radiation to molecular vibrations in nanoporous 3D nanoantenna arrays can open new application routes for plasmon-enhanced physical–chemical reactions

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF ASYMMETRICAL BEHAVIOUR OF RUDDER / PROPELLER FOR TWIN SCREW SHIPS

the present work addresses the asymmetrical functioning of rudder/propeller complex of twin screw/twin rudders ships. A series of free running model test results are analysed, with the aid of some simplified numerical calculations. this analysis allows to show the asymmetrical propeller loading during manoeuvres and the considerably different rudder functioning. A possible simplified model to include these effects in manoeuvring simulators is proposed and discussed, allowing to define the needs for future research activities to further improve the understanding of the different phenomena shown

Integrated Germanium-on-silicon Waveguides for Mid-infrared Photonic Sensing Chips

Germanium-on-silicon waveguides are designed, fabricated and characterized with a novel near-field infrared spectroscopy technique that allows on-chip investigation of the in-coupling efficiency. On-chip propagation along bends and straight sections up to 0.8 mm is demonstrated around λ = 6 μm

Benchmarking the Use of Heavily-Doped Ge Against Noble Metals for Plasmonics and Sensing in the Mid-Infrared

Despite the recent introduction of heavily-doped semiconductors for mid-infrared plasmonics, it still remains an open point whether such materials can compete with noble metals. We employ a whole set of figures of merit to thoroughly assess the use of heavily-doped Ge on Si as a mid-infrared plasmonic material and benchmark it against standard noble metals such as Au. In doing this, we design and model high-performance, CMOS compatible mid-infrared plasmonic sensors based on experimental material data reaching plasma frequencies up to about 1950 cm−1. We demonstrate that plasmonic Ge sensors can provide signal enhancements for vibrational spectroscopy above 3 orders of magnitude, thus representing a viable alternative to noble metals

Modeling of second harmonic generation in hole-doped silicon-germanium quantum wells for mid-infrared sensing

The development of Ge and SiGe chemical vapor deposition techniques on silicon wafers has enabled the integration of multi-quantum well structures in silicon photonics chips for nonlinear optics with potential applications to integrated nonlinear optics, however research has focused up to now on undoped quantum wells and interband optical excitations. In this work, we present model calculations for the giant nonlinear coefficients provided by intersubband transitions in hole-doped Ge/SiGe and Si/SiGe multi-quantum wells. We employ a valence band-structure model for Si1-xGex to calculate the confined hole states of asymmetric-coupled quantum wells for second-harmonic generation in the mid-infrared. We calculate the nonlinear emission spectra from the second-order susceptibility tensor, including the particular vertical emission spectra of valence-band quantum wells. Two possible nonlinear mid-infrared sensor architectures, one based on waveguides and another based on metasurfaces, are described as perspective application

Mid-Infrared Plasmonic Platform based on Heavily Doped Epitaxial Ge-on-Si: Retrieving the Optical Constants of Thin Ge Epilayers

The n-type Ge-on-Si epitaxial material platform enables a novel paradigm for plasmonics in the mid-infrared, prompting the future development of lab-on-a-chip and subwavelength vibrational spectroscopic sensors. In order to exploit this material, through proper electrodynamic design, it is mandatory to retrieve the dielectric constants of the thin Ge epilayers with high precision due to the difference from bulk Ge crystals. Here we discuss the procedure we have employed to extract the real and imaginary part of the dielectric constants from normal incidence reflectance measurements, by combining the standard multilayer fitting procedure based on the Drude model with Kramers-Kronig transformations of absolute reflectance data in the zero-transmission range of the thin film.Comment: Infrared, Millimeter, and Terahertz waves (IRMMW-THz), 2014 39th International Conference o